×

Install LEMP Stack on Debian 9 - Step by Step Process ?

This article covers steps to install a LEMP stack on a Debian 10 server using MariaDB as the database management system. The LEMP software stack is a group of software that can be used to serve dynamic web pages and web applications. The name "LEMP" is an acronym that describes a Linux operating system, with an (E)Nginx web server. The backend data is stored in a MariaDB database and the dynamic processing is handled by PHP.

Although this software stack typically includes MySQL as the database management system, some Linux distributions — including Debian — use MariaDB as a drop-in replacement for MySQL.


To install Nginx Web Server.

1. Run the apt commands:

$ sudo apt update
$ sudo apt install nginx

On Debian 10, Nginx is configured to start running upon installation.


Install LAMP Stack on Debian 9 - Step by Step Process ?

This article covers how to install LAMP on Debian server along with PHPMyAdmin to manage your database. LAMP stands for Linux OS, with Apache web server, Data store in a MySql or MariaDB database, and dynamic content is processed by PHP.


To install Apache on Debian:

1. Run the following command:

$ apt-get install apache2

2. To restart your web server by typing the following command:

$ service apache2 restart


Install LEMP Stack on Ubuntu 18.04 - Step by Step Process ?

This article covers how to Install a LEMP Stack on Ubuntu 20.04 LTS. LEMP stack is a group of open-source software that is typically installed together to enable a server to host dynamic websites and web apps. LEMP stands for Linux OS, with the Nginx (pronounced like "Engine-X") web server, Data store in a MySQL database, and dynamic content is processed by PHP.


To install Nginx Web Server:

1.  Run the commands below to install Nginx.

$ sudo apt update
$ sudo apt install nginx

2. Allow traffic on port 80.

$ sudo ufw allow 'Nginx HTTP'

You can verify the change by running:

$ sudo ufw status


Install LAMP Stack on Ubuntu 18.04 - Step by Step Process ?

This article covers step by step process to install a LAMP stack on an Ubuntu 18.04 server. LAMP stack is a group of open-source software that is typically installed together to host dynamic websites. LAMP stands for Linux OS, with Apache web server, Data store in a MySQL database, and dynamic content is processed by PHP.


To Install Apache and Update the Firewall.

1. Install Apache using Ubuntu’s package manager, apt:

$ sudo apt update
$ sudo apt install apache2

2. Allow incoming HTTP and HTTPS traffic for this profile:

$ sudo ufw allow in "Apache Full"


Install PHP On Ubuntu 18.04 | 16.04 - Step by Step Process ?

This article covers steps To Install Linux, Apache, MySQL, PHP (LAMP) stack on Ubuntu Linux System. PHP stands for Hypertext Preprocessor, and it’s a script-based server-side programming language. PHP is often used to automate server tasks. It handles tasks like dynamic content, database requests, and processing and displaying data.

A "LAMP" stack is a group of open source software that is typically installed together to enable a server to host dynamic websites and web apps. 

This term is actually an acronym which represents the Linux operating system, with the Apache web server. 

The site data is stored in a MySQL database, and dynamic content is processed by PHP.


To Install PHP 7.2 with Apache on Ubuntu:

1. Ensure you are using the latest Ubuntu updates by entering the following command into a terminal window:

$ apt-get update && apt-get upgrade

2. To install PHP 7.2, enter the following command:

$ sudo apt-get install php libapache2-mod-php

Confirm the installation by hitting Enter. The system will download and install PHP from the software repositories. This command also installs dependencies and modules for use with Apache.

3. Verify PHP was installed, with the command:

$ php -v


Install phpMyAdmin with Apache on Ubuntu 20.04 - Step by Step Process ?

This article covers how you can  seamlessly install phpMyAdmin on your Ubuntu Linux system.

Working with a database can sometimes be intimidating, but PhpMyAdmin can simplify tasks by providing a control panel to view or edit your MySQL or MariaDB database.

To Install phpMyAdmin on Ubuntu:
1. Update the apt package tool to ensure we are working with the latest and greatest.

$ apt update && upgrade

2. Install PhpMyAdmin and PHP extensions for managing non-ASCII string and necessary tools.

$ apt install phpmyadmin php-mbstring php-gettext

During this installation you’ll be asked for the web server selection, we will select Apache2 and select ENTER.
Here, you have the option for automatic setup or to create the database manually.
For us, we will do the automatic installation by pressing ENTER for yes.
3. At this setup, you'll be asked to set the PhpMyAdmin password.
Specifically for the PhpMyAdmin user, phpmyadmin,  you'll want to save this in a secure spot for later retrieval.
4. Enable PHP extension.

phpenmod mbstring

5. Restart the Apache service to recognize the changes made to the system.

# systemctl restart apache2


Install and Configure Apache Web Server with Virtual Host on Debian 10 - Do it now ?

This article covers how to perform installation and configuration of Apache web server on Debian 10.

Also, you will learn how to create virtual hosts on an Apache server and troubleshoot errors. These steps are almost the same for Ubuntu and LinuxMint distributions.

Apache HTTP Server is a free and open-source web server that delivers web content through the internet. It is commonly referred to as Apache and after development, it quickly became the most popular HTTP client on the web.


On most systems if you installed Apache with a package manager, or it came preinstalled, the Apache configuration file is located in one of these locations: /etc/apache2/httpd. conf. /etc/apache2/apache2.


Debian/Ubuntu Linux Specific Commands to Start/Stop/Restart Apache:

1. Restart Apache 2 web server, enter: # /etc/init.d/apache2 restart. $ sudo /etc/init.d/apache2 restart.

2. To stop Apache 2 web server, enter: # /etc/init.d/apache2 stop.

3. To start Apache 2 web server, enter: # /etc/init.d/apache2 start.


To check running status of LAMP stack:

1. For Ubuntu: # service apache2 status.

2. For CentOS: # /etc/init.d/httpd status.

3. For Ubuntu: # service apache2 restart.

4. For CentOS: # /etc/init.d/httpd restart.

5. You can use mysqladmin command to find out whether mysql is running or not.


MariaDB on Debian 10 - Step by step process to install it ?

This article will guide you on the different methods to conveniently install and start the MariaDB service on a Debian 10 system. Also, we dealt with how to easily remove MariaDB from your Debian 10 system. 

In MariaDB replication is faster whereas in MySQL replication is slower. 

MariaDB is Open Source whereas MySQL uses some proprietary code in its Enterprise Edition. 

MariaDB doesn't support Data Masking and Dynamic column while MySQL supports it. Comparatively MariaDB is faster than MySQL.

Since MariaDB is a fork of MySQL, the database structure and indexes of MariaDB are the same as #MySQL. 

This allows you to switch from MySQL to MariaDB without having to alter your applications since the data and data structures will not need to change. Data and table definition files are compatible.


To install #MariaDB on #Debian , follow these steps:

1. First update the apt packages index by typing: sudo apt update.

2. Once the packages list is updated, install MariaDB by running the following command: sudo apt install mariadb-server.

3. The MariaDB service will start automatically.


Install Linux, Apache, MariaDB, PHP (LAMP) Stack on Debian 10 - Step by step process to do it ?

This guide will help you on how to #install the LAMP stack (Linux, Apache, MariaDB, and PHP ) in your #Debian system. 

LAMP stands for Linux, Apache, MySQL, and PHP. Together, they provide a proven set of software for delivering high-performance web applications.

For a web application to work smoothly, it has to include an operating system, a web server, a database, and a programming language. 

A LAMP Stack is a set of open-source software that can be used to create websites and web applications. 

LAMP is an acronym, and these stacks typically consist of the Linux operating system, the Apache HTTP Server, the MySQL relational database management system, and the PHP programming language.

To Install #LAMP stack on Ubuntu:

1. Update your system. sudo apt-get update.

2. Install Mysql. sudo apt-get install mysql-server mysql-client libmysqlclient-dev.

3. Install #Apache server.

4. Install #PHP (php7.0 latest version of PHP).

5. Install #Phpmyadmin (for #database).


MySQL on Ubuntu 20.04 LTS - How to Install and Configure ?

This article will guide you on how to install and configure #MySQL server on the #Linux system Ubuntu 20.04 in this article. Also, we have explored different basic commands to run MySQL server. MySQL is a relational #database that uses SQL to query a database. It facilitates data storing, modifying, and management in a tabular format. To install the latest version of MySQL in #ubuntu: 1. Enable MySQL #Repositories. 2. Install MySQL Repositories. 3. Refresh the Repositories. 4. Install MySQL. 5. Set up MySQL Security. 6. Start, Stop, or Check Status of MySQL Service. 7. Launch MySQL to Enter #Commands.